Moblite7 HDZERO 1S 75mm digital HD brushless whoop V3

Are you looking to buy a HappyModel Moblite7 HDZERO 1S 75mm digital HD brushless whoop V3 in Australia?

Experience high-definition aerial action with the Happymodel Moblite7 HDZero V3. This lightweight and reliable drone captures stunning HD video effortlessly, offering an easy setup for swift adventures. Its durable design ensures long-lasting performance, making it the perfect choice for FPV whoop enthusiasts.

Specifications

• Brand Name: Happymodel
• Model: Moblite7 HDZERO V3
• Frame wheelbase: 75mm
• Weight: 31.5 gram without battery
• Size: 98mm*98mm*50mm
• UART ELRS v3.0 ready
• Compatible with 1S Lipo battery or Lihv battery
• Battery Plug: GNB A30
• Onboard blackbox ready

Flight Controller SuperX HD ELRS

• Betaflight 4.4.2 firmware ready
• Firmware target: CRAZYBEEF4DX
• MCU:STM32F411CEU6 (100MHz, 512K FLASH)
• Sensor: BMI270 or ICM42688P (SPI connection)
• Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
• Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
• Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
• Bluejay ESC Firmware ready
• Built-in 5V 1A BEC
• Built-in voltage detection
• No betaflight analog osd chip

Onboard 4in1 ESC

• Power supply: 1-2S LiPo/LiPo HV
• Current: 12A continuous peak 15A (3 seconds)
• Support ESC-Configurator and BLHELI_S Suite configurator
• Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
• Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

• RF Frequency: 2.4GHz
• Antenna: enameled copper wire 31mm length
• Telemetry output Power: <12dBm
• Receiver protocol: CRSF
• Default firmware version: ExpressLRS V3.0.1
• The same hardware with Happymodel EP1 receiver
• Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

Motor

• Model: EX1002 20000KV
• Configu-ration:9N12P
• Stator Diameter:10mm
• Stator Length:2mm
• Shaft Diameter:Φ1.5mm
• Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
• Weight(g):2.5g
• No.of Cells(Lipo):1S only

Propeller Gemfan 1610-2 Bi-Blades

• Weight:0.24g
• Material: PC
• Pitch:1 inch
• Props Dia:40mm
• Center Hole Dia:1.5mm

HDZero Nano Lite Camera

• 14x16x11 mm
• 1.5gram
• 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
• Excellent low light performance
• Fov:
• 4:3: D:130° H:108° v:84°
• 16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX

• 1S Input
• 25mW/200mW RF Output-SmartAudio Support
• 25.5×25.5 M2 Soft Mounting- Antenna Retention
• Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
• 4.5grams/4mm Thickness (without shielding)

Includes

• 1x Mobula7 v4 75mm Frame+Canopy
• 1x SuperX HD ELRS AIO Flight Controller
• 4x Happymodel 1002 KV20000 Unibell Brushless motor
• 1x Gemfan 1610-2 bi-blades Propeller (4cm+4ccw)
• 1x HDZero Nano Lite Camera
• 1x HDZero Whoop Lite VTX
• 1x Spare Canopy
• 1x Propeller disassemble tool
• 1x Screw driver

Browse more

• Browse all HD Tinywhoops
• Browse all HappyModel
• Browse all HDZero Quads